{"product_id":"bently-nevada-5292-04-radiation-resistant-proximity-transducer-system","title":"Bently Nevada 5292-04 Radiation Resistant Proximity Transducer System","description":"\u003ch2\u003eBently Nevada 5292-04 Radiation Resistant Proximity Transducer System\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 5292-04\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e5292-04\u003c\/strong\u003e Radiation Resistant Proximity Transducer System, operates as a dedicated hardware component for rotor position and vibration monitoring within high-gamma radiation environments.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e5292-04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.85 kg \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eVariable based on probe\/cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 deg C to 177 deg C (Probe)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e12 mA nominal at -24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Type\u003c\/td\u003e\n\u003ctd\u003eRadiation-resistant eddy-current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e0 Hz to 10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Radiation Tolerance\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e5292-04\u003c\/strong\u003e system utilizes specialized material construction to maintain signal integrity in environments where ionizing radiation would degrade standard electronic components. The system employs a radiation-hardened probe, a shielded extension cable, and a remote-mounted Proximitor sensor. By locating the Proximitor unit outside the high-radiation zone using extended cable lengths (available in 15, 40, or 110 feet), the system minimizes electronic exposure and significantly extends the operational lifespan of the active conditioning circuitry. During commissioning, gap voltage validation—targeting -10 VDC at the nominal gap—is required to ensure the system maintains its linear range despite the radiation-hardened design specifications.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the 5292-04 compatible with existing 3300 or 3500 monitoring systems?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the system is backward compatible with 3300 and 3500 series monitors that have been configured for these radiation-resistant sensors. Consult with your local support representative for specific monitor modification requirements.\u003c\/p\u003e\n\u003cp\u003eQ: Can the extension cable length be modified in the field?\u003c\/p\u003e\n\u003cp\u003eA: No. The system is factory-calibrated for specific total system lengths. Modifying the cable length will introduce measurement errors due to impedance changes in the coaxial path.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProximitor Placement\u003c\/strong\u003e: Mount the Proximitor sensor in a low-radiation area outside the primary containment or radiation zone to prevent premature component failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing\u003c\/strong\u003e: Use high-quality conduit to protect the radiation-resistant extension cables from mechanical damage. Ensure the minimum bend radius of 25.4 mm is respected to maintain cable integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding\u003c\/strong\u003e: Connect the signal common to the monitoring system earth ground at a single point to prevent ground loops. Ensure all connectors are tightened to the recommended finger-tight plus 1\/8 turn specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap Adjustment\u003c\/strong\u003e: Set the initial probe gap to the manufacturer's recommended distance, verifying the output voltage reaches the -10 VDC nominal target during static machine conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 14px;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #e74c3c;\"\u003e\u003cspan style=\"font-size: 20px;\"\u003e\u003cspan style=\"font-family: Arial,Helvetica,sans-serif;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":44364173475939,"sku":null,"price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/2775\/3315\/files\/5292-04-1.jpg?v=1784098894","url":"https:\/\/precisemodule.com\/products\/bently-nevada-5292-04-radiation-resistant-proximity-transducer-system","provider":"Precise Module Ltd.","version":"1.0","type":"link"}